Free Shipping on All Orders

  • Tempo PE2003-G Pulser Fault Locator | PE2003-G

    PE2003-G
    (0)
    $1,087.00

    The TEMPO Communications PE2003-G Pulser Ground Fault Locator identifies the exact location of even the smallest breaks in buried wire and cable insulation by encapsulating a high-voltage signal that radiates into the ground at the location of the faults. With the A-frame mounted receiver, a visual analog meter points the way to the source of the voltage.

    $1,087.00
  • Armada GFL3000 Ground Fault Locator (GFL3000)

    GFL3000
    (0)
    $1,051.00
    • Locates buried ground faults
    • Dual power capability (hi/lo)
    • Audible ‘On’ beeper
    • Battery power indicator
    • Custom molded case
    • Rechargeable battery
    $1,051.00
  • Armada Pro 800 Wire and Valve Locator (PRO800D)

    PRO800D
    (0)
    $901.00
    • 8 D-Cell Transmitter Power
    • 20% more transmitter power
    • Wireless broadcast mode for simple cable connection
    • AC interference/buzz removal
    • Null or peak tracking receiver/wand
    $901.00
  • Tempo 501 Tracker II Cable Locator | 501

    501
    (0)
    $751.00

    Trace and determine the depth of buried wires and metallic pipes with the 501 Tracker II Cable Locator from Tempo Communications.

    The 501 Tracker II underground wire locator offers three methods of connection to fit every location job. Direct connection for maximum signal, inductive coupling for a cable, and an internal inductive antenna for the underground location of buried and inaccessible cables. The lightweight receiver provides both audible and visual indications of signal strength for accurate identification.

    With its inductive signal detection, the 501 Tracker II cable and wire locator can be used on active or dead systems. Now you can quickly trace the path and determine the depth of buried wires, cables, and metallic pipes or conduit and find the ends of a cut cable without having to deactivate the systems.

    $751.00
    • Marking spray attachment
    • Draw freeform paths in real-time
    • Quick & easy material estimation
    • Calculate area (sq. ft.) cubic yards
    • No need for GPS, cell service, or internet (Works anywhere)
    • Guide mode for relocating key points
    • Add notes & images to projects
    • Easy Exporting (DXF, JPG, PLTT)
    • Change measurement unit (feet, yard, meter, inch)
    • IP54 water and dust resistant
    $381.00
  • Armada PRO95 RMS Clamp Meter (PRO95)

    PRO95
    (0)
    $271.00
    • Measures line currents from 5 microamperes
    • Measures AC volts and amps, DC volts and ohms
    • True RMS measurement
    • Auto-off after 30 minutes idle
    • Back-lit screen for dark areas
    $271.00
    • Wire Tracing Capability: Accurately traces and locates buried wires or cables in irrigation systems and other low-voltage applications.
    • Tone Generator: Sends a clear, detectable signal through the wire for easy tracking and identification.
    • High-Sensitivity Probe: Detects the signal transmitted by the tone generator, helping users follow the path of the wire with precision.
    • Fault Detection: Helps identify breaks, cuts, or other faults in buried wires or cables.
    • Versatile Use: Suitable for irrigation systems, landscape lighting, and other electrical systems using low-voltage wiring.
    • User-Friendly Operation: Simple to use, allowing even less experienced technicians to easily locate and troubleshoot wiring problems.
    • Portable and Durable Design: Compact and robust, ideal for use in outdoor environments, offering durability for fieldwork
    $231.00
  • Tempo 24BK Irrigation Tester Kit | 24BK

    24BK
    (0)
    $201.99

    TEMPO Communications continues its excellence in irrigation system troubleshooting with the Model 24BK Station Master Pro. The upgraded Station Master Pro is a portable, battery-operated irrigation system tester that combines solenoid activation and wire identification for easy diagnosis of faults in irrigation systems.

    The easy-to-understand LEDs notify the technician if sufficient voltage is being supplied by the controller and the condition of the solenoid. The solenoid activation mode is used to activate valve solenoids either from the controller or at the valve, along with testing the continuity of the solenoids making it easy for the technician to find the fault. In chatter mode, the Station Master Pro will turn the solenoid off and on about once per second to aid in locating the valve by ear. In addition, it has the added functionality of providing tone generation to identify wires that can be traced with any TEMPO amplifier probe. It also includes a clip and piercing pin bent nose clip for use on insulated wires. This way you can connect the unit for testing without cutting or stripping wires.

    $201.99
  • Armada PRO48K Irrigation Station Test Kit (PRO48K)

    PRO48K
    (0)
    $179.99
    • Activate solenoids
    • Verify 24v clock output
    • Detect short/open wires
    • Chatter solenoids
    • Check solenoid condition
    • ID wire with tone/probe
    $179.99
  • Armada PRO90 Automatic Clamp Multimeter (PRO90)

    PRO90
    (0)
    $151.00
    • Automatic AC or DC sensing
    • Automatic decimal placement
    • Automatic measurement of amps, volts, and resistance
    • Automatic backlighting
    • Automatic power-down
    • No fuses to blow
    $151.00
  • Armada PRO48 Irrigation Station Tester (PRO48)

    PRO48
    (0)
    $131.00
    • Activate solenoids
    • Verify 24v clock output
    • Detect short/open wires
    • Chatter solenoids
    • Check solenoid condition
    • ID wire with tone/probe
    $131.00
  • The Tempo 701K-G/6A is a fully upgraded version of our powerful 701K industry-standard Professional Tone and Probe Tracing kit, including ABN clips. The 701K-G/6A Tone and Probe kit offers superior tracing for low-voltage applications such as telephone, data, and security alarm wiring. Essential equipment for the internal wiring technician, the 701K-G/6A provides the ability to check the voltage on wire pairs as well as generate a tagging tone along the wire which is then picked up by the tracing probe.

    TEMPO is proud to introduce fully upgraded versions of its tone generator and wire tracing probe kits. This all-new line of products offers superior tracing for low-voltage applications such as telephone, data, and security alarm wiring. Essential equipment for the internal wiring technician, the Tempo tone and probe kits provide the ability to check Voltage on wire pairs as well as generate a tagging tone along the wire, which is then picked up by the tracing probe.

    Featuring overall improved internal circuitry in both the amplifier and the tone generator, all of the new tone probe kits promise to provide an enhanced customer experience for tracing and identifying single conductors or cables within bundles, either at midpoint or at remote ends. All of the new tone and probe kits are assembled in the USA and are CE-certified. When it comes to superior tracing capability, TEMPO’s tone and probe kits are faster, safer, and easier than ever before.

    $104.99
  • Armada PRO12 Voltage Detector (PRO12)

    PRO12
    (0)
    $41.00
    • Check Outlets and Insulated Cables for Power Voltage Before Handling or Using Them.
    • Fully insulated for safety. IEC 61010 rated and CE compliant.
    • Two range settings allow the detection of low and high voltages like 12 volts AC and 120 volts AC in a single unit.
    • Audible and visual indicators.
    • Backlighted LCD Display and Headlight.
    • Uses two (2) AAA Batteries (not included).
    $41.00
Shopping Cart 0

No products in the cart.

Sort by: